Home | Order Form | Contact Us

VIOLA / THOMPSON GUN CASE: SOLD OUT

Sorry folks, all sold out.

This Case is designed to accommodate all models of Colts, the AO & Savage Thompsons and by removing the center divider board, will also accommodate the M1A1 military model full length, without the compensator. In the area under the divider board, are "C" drum, "L" drum and stick magazine storage.

Now you can carry your antique Thompson in public with confidence, or take it to the Range, or simply display it at a local Gun Show.

BOOK: “COLT THOMPSON SERIAL NUMBERS”

************* Book is SOLD OUT ******
Book is undergoing major revision and upgrade

The Fifth edition of the Colt Thompson Serial numbers book has arrived, in May 2006. This is 1200 pages of unique and sometimes colorful history of the Colt Thompson, with special sections on Navy, Marine Corps, George Rorke, John Dillinger, and the Valentines Day Massacre. There is also a section on serial numbered drums.

This is a meticulous compilation of history for the sacred Colt Thompson Submachine Gun. A must for the advanced "Thompson" collector, or anyone else interested in this Colt Thompson history.

Read about the Author





 

CLEANING ROD:

This was my first venture several years ago. It is my own exact reproduction of the original “LONG TYPE” cleaning rod, carried inside the lid of the famous FBI "Thompson" hard case. This cleaning rod measures 20 1/4 inches, as per the originals. Meticulous work went into the production of this fine piece.

This piece is needed to make your hard case complete, and original. Because of production problems, this was a very limited run.

$100.00 including shipping & handling   >>Please use the order form to purchase




 
 

METAL SPARE PARTS KIT BOX :

The long awaited "Thompson" metal SPARE PARTS BOX, is finally here. I have produced a limited number of this rare metal spare parts kit box. This metal box was produced exactly like the original one from 1928/30, including the original black copper finish.

This is an all American product, for the “All American” gun. An original kit box is pictured on p-356 of Hill’s, “Thompson: the American Legend”.

I offer this metal Spare Parts Kit box for: $225.00.

I also offer a package which includes; Spare Parts Kit box and, original long type Cleaning Rod, for the "Thompson" hard case: $300.00.

If you have a "Thompson" Hard Case, this is a must, to make it all compete

>>Please use the order form to purchase





 

BORE BRUSH & THONG HANDLE: for the Spare Parts Kit box:

I now offer this very rare pull-through BORE BRUSH & thong handle for the kit box. It is also an exact, and quality reproduction of the original. This brush was made with stiff horse hair, as was the original. It is very useable.

I offer this pull through Bore Brush for: $25.00.   >>Please use the order form to purchase

CHAMBER BRUSH, for the Spare Parts Kit box:

The Chamber Brush (with bent handle), is now also available.
This Chamber Brush is also an exact quality reproduction of the original. It is made with the same stiff horse hair as the Bore Brush.

These two hard to find cleaning brushes make the inventory of your Spare Parts Kit Box complete.

I offer this Chamber Brush for: $25.00.   >>Please use the order form to purchase





 

COLT THOMPSON TYPE, “FLAT” EJECTOR:

I have just finished a “new production run” of this rare and desired, Colt Thompson type “FLAT EJECTOR”. Meticulous work went into these pieces to make them worthy of the "Thompson" Submachine Gun.

These new Ejectors are made from the same steel (1095), as per the originals and hardened to the same specs.
This limited run was made in the US of A, as all my other products are.

This quality piece is a must, if you are restoring a Colt Thompson, or a GI, or any other type of "Thompson", including putting the final touches on a rare Richardson Display Thompson receiver. This beautiful Flat Ejector puts class to any "Thompson".

"Thompson" Flat Ejector:
$60.00, including shipping & handling   >>Please use the order form to purchase




 

“1921” "THOMPSON" RECOIL SPRINGS

I have reproduced the 1921 type Colt Thompson RECOIL spring.
These are 10 1/2 inches long, and of the finest American made quality.
These 1921 type springs have been live fire tested by myself in Oregon.

1921 Thompson RECOIL SPRING $10.00 + 1.00 Shipping     >>Please use the order form to purchase





 

"Thompson" STANDS:

I made my first "Thompson" Stand in 1997. It was for the "Thompson" with a 50 rd drum, or a 20 rd stick magazine. It was a success. I make these in Oregon of special Oregon black walnut. Each one of these is very special. These are produced in very limited numbers. I call this my “L” drum stand.

"Thompson" 50 rd Stand
 $75.00 + 15.00 boxing and shipping   >>Please use the order form to purchase

"Thompson" 100 rd Stand
$110 + 15.00 boxing and shipping   >>Please use the order form to purchase

NEW THOMPSON STAND:

At the same price I am introducing a NEW type Thompson "L" drum type stand. This stand cradles the L drum, just like the C drum stand.
It works well and it looks good. No obstruction to the view of the gun.

SLING SWIVEL Base:

This replaces your unwanted sling swivel. This revolutionary new piece, is plain, and smooth, with no ugly loop.
It is metal and black. You simply use your original sling swivel screws. It makes your 28 buttstock look more sleek and attractive. These are truly neat.

$12.00 each includes shipping   >>Please use the order form to purchase



 

STERLING SILVER "THOMPSON's":

These little "Thompson's" are great for a tie tack, or hat tack. They are made of sterling silver and are 2 3/8 inch long. They are truly beautiful and look like the pewter ones on the spine of the book.

$30.00 each + 1.00 shipping    >>Please use the order form to purchase

 

LITTLE “L” DRUMS:

These little “L” drums are also great for tie tack or hat tack. These little Drums are in very close detail to the originals. They are made of pewter and measure 1 inch in diameter.

$12.00, which includes shipping & handling   >>Please use the order form to purchase



 

WINDING / LOADING INSTRUCTIONS:

This instruction card is my authentic reproduction of the original “Winding & Loading Instructions card” for the 1928 Navy "Thompson". This card was a year in the making.

These instruction cards were placed on to the “L”, and “C” drums, when they were sold in 1928, for your safety sake. This regarded the model change, and the difference in speed of firing, from the 1921 to the 1928 Navy.

$5.00 + 1.00 shipping    >>Please use the order form to purchase



 

SHIRTS:

I now offer a new line of shirts by, “THOMPSON GUN” brand. I offer a white Golf, Polo type cotton shirts. I have only EX-Large size.
These have the "Thompson" logo on the left pocket and right sleeve.

Golf Shirts, EX-Large
$20.00 + 2.00 shipping & handling   >>Please use the order form to purchase

HANDKERCHIEFS:

White silk handkerchief w/logo

$6.50 (includes shipping)   >>Please use the order form to purchase



 

OTHER ONGOING REQUESTS:

WTB: “Early Type” Colt Trigger Frame:
It must have early markings (Automatic- Semiautomatic) and be under serial number 2900. Will pay top dollar for this original piece, not reblued or refinished.

LOOKING FOR: Trigger Frame No. 6666

LOOKING FOR: Colt Thompson S/N 8267. I have your trigger frame.

>> Please our "Contact Form" to respond to these WTB requests